snakelace2

User Name: You need to be a registered (and logged in) user to view username.

Total Articles : 0

https://www.repairmywindowsanddoors.co.uk/southampton-window-lock-repairs-near-me/

Replacing Lock on uPVC Door If youre looking to change the lock on your upvc door it is necessary to remove the existing handle and screw holes This is generally easy to do The next step is to find the screw that holds the barrel in place It is typically a different color than the other screws and located on the outside of the faceplate of the lock Take the Cylinder off To change the lock on your upvc doors first you must take off the cylinder that is currently in use This is a simple procedure that takes about 30 minutes All you require is an ordinary screwdriver Youll need to locate the Euro fixing screw for cylinders that is typically located on the inside edging of the door next to the lock cylinder The screw is typically colored differently from the rest of the screws and is easy to identify Remove this screw and keep it in a safe place Once the cylinder is removed you can start working on the removal of the handle To accomplish this youll have to open the door wide enough so that you can observe the inside edge of the door as well as the side of lock faceplate Begin by using a screwdriver to remove the screw that connects the handle to the door Once the screw has been removed you can pull the handle towards you and take the rest of it off the door If you have trouble removing the handle you may need to take off the screw that is holding it to the stud inside the door frame You can make use of a screwdriver or a drill to remove the handle Be careful not to cut or crossthread it If you are about to replace your cylinder be sure that it is the correct size for the door you have Cylinders are sized according to two measurement points a the distance from the middle of the Fixing Screw hole to the bottom of the cylinder and b the distance between the keyhole and the edge of the lock plate Take the handle off The good news is that if your upvc handle becomes stiff floppy or loose it is an easy issue to solve The multipoint lock cylinder or other internal parts within the door in between the handle and handle frame are often the cause It is not uncommon for Upvc locks to become worn due to the weather heavy usage or simply ageing and this can cause problems with the locking mechanism or closing mechanism of the door If the cylinder has worn it will often be difficult to turn the key Additionally the lock may be stiff which can cause the handle to drop The cylinder is easily replaced and it is a straightforward process This can be accomplished by yourself but you will need to have some knowledge about the mechanisms operation The first step is to take off the handle which will permit you to get access to the cylindrical and replace it with a new one To accomplish this you will need an screwdriver and tape measure It is crucial to know the exact dimensions of your cylinder to be able to get a replacement cylinder that is suitable for The cylinder is the element that locks your upvc door Therefore it is crucial to ensure that you receive a replacement of the same size To remove the old cylinder youll have to remove the screws that hold it in place Be careful not to strip the screws as this could make it very difficult to remove them again in the future After the screws have been removed the cylinder should be easy to remove Take off the Lock Barrel uPVC doors are made with very strong materials and are designed to keep your home safe and secure They come in a wide range of styles and colours that will fit into any style of home They are also maintenancefree and energy efficient However they are not without drawbacks Over time the locking point or barrel lock may fail and require replacement It is a simple procedure however you must be aware of a few points prior to beginning Youll have to take off the door handle to get access to the screw that holds the lock cylinder in place Its typically a different color from the rest of the screws and is located at the edges of the door near where the keyhole is located Remove the screw and place it somewhere safe Slide the handles out on both sides of the door Do not hurry because this could damage the uPVC After you have removed the handles you can use a screwdriver and take off the screws that attach the handles to the door frame This will allow you to gain access to the pins holding the cylinder in place Then you can try wriggling and pulling the cylindrical to see if it comes loose When it does pull it towards you and then out of the socket After you have removed the old cylinder lock it is crucial to replace it with a new one that has antisnap protection and antibump You can do this yourself if you have the right tools or you can hire an expert locksmith to do it for you This is a fairly simple task that will take five minutes to complete Install the New Cylinder A upvc lock could be damaged or broken in many different ways For instance the cylinder might have become damaged or not working as it should Whatever the reason for changing your Upvc lock its essential to choose the correct size replacement repairmywindowsanddoorscouk is because if the incorrect one is installed it could lead to your upvc door being more vulnerable to a technique known as lock snapping which is the cause of 25 per cent of burglaries To avoid this it is vital that the correct cylinder is installed and the procedure to do it is a breeze and takes just five minutes To swap the handle faceplate and cylinder it is necessary to remove the screws attached to them Make sure you open the handle and have access to the lock cylinder located on the other side of the faceplate of the handle This will enable you to easily remove the lock cylinder from the handle without having to move it or expose the inside of the frame The next step is to take the old cylinder out and measure it you must determine the length of the cylinder as well as the diameter of the cylinder which is used to lock and unlock the door This will allow you to find a replacement of similar in size or smaller which is the most important part of the whole process The cylinder should be flush with the handle and not extend more than 5mm away from it Install the Handle It is not uncommon for a door lock made from upvc to stop working and this could be caused by something breaking inside the case which controls the bolts that retract into the strike or keep plate This is usually fixed by altering the Allan key underneath the hinges However this could cause stress on the parts within the central casing and it is recommended to seek out a professional During the process of changing it is essential to have quick and easy access to both sides of the handle as well as having the appropriate tools It is recommended to prop the door up so that it does not close during the process The first step is to loosen the screws that keep the handle together using a screwdriver Once the screws are loosen you can remove the handle After removal of the cylinder as well as the handle its time to install the new handle Make sure the new handle is the right size for the cylinder you have currently and hole in the center Examine the length of the spindle on the lever that you are currently using to determine this Also ensure that the screw fix centres on the handle match the screw fixing centres on your existing cylinder and hole centre The replacement handles made by Fab and Fixed are available in a variety of styles and are designed to last They are ideal for those who wish to upgrade their Upvc handles and enhance their home security A good handle will ensure your home is safe and secure and impossible for thieves to gain access