When it comes to hanging wallpaper, the secret to a smooth, long-lasting finish starts with using the right adhesive — and Bartoline Wallpaper Glue is one of the most trusted names on the market. Whether you’re decorating a single feature wall or an entire room, this guide will walk you through exactly how to use Bartoline Wallpaper Glue for perfect, professional-looking results every time. For more information please visit Bartoline

What You’ll Need

Before you start, gather the following supplies:

  • Bartoline Wallpaper Glue (flakes or ready-mixed)
  • Clean mixing bucket
  • Measuring jug
  • Stirring stick or whisk
  • Clean sponge or cloth
  • Wallpaper brush or roller
  • Seam roller
  • Wallpaper hanging tools (knife, smoother, plumb line)

Step 1: Prepare the Wall

A clean, smooth surface ensures the wallpaper adheres properly.

  1. Remove old wallpaper completely using a scraper or steamer.
  2. Wash the wall with warm soapy water to remove dust, grease, or adhesive residue.
  3. Repair any cracks or holes with filler, then sand smooth once dry.
  4. Allow the wall to dry completely before applying glue.

Tip: If the wall is very absorbent (e.g., new plaster), apply a diluted coat of Bartoline glue (1 part glue to 2 parts water) as a primer and let it dry.

Step 2: Mix the Glue

If you’re using Bartoline Wallpaper Adhesive Flakes, follow these steps:

  1. Pour the recommended amount of cold water into a clean bucket (check the packet for exact ratios).
  2. Sprinkle the flakes slowly into the water while stirring constantly to prevent lumps.
  3. Keep stirring for about 20–30 seconds until evenly mixed.
  4. Let the mixture stand for about 3 minutes, then stir again to activate the adhesive.

Pro Tip: Bartoline glue thickens slightly as it stands — ensure a smooth consistency before use.

If you’re using Bartoline Ready Mixed Paste, skip this step — it’s ready to apply straight from the tub.

Step 3: Apply the Adhesive

  1. Lay the wallpaper face down on a clean table.
  2. Using a paste brush or roller, spread an even coat of Bartoline glue over the back of the paper.
  3. Make sure to cover the edges thoroughly, as these areas are prone to lifting.
  4. Fold (book) the paper gently with the glued sides together, aligning edges, and let it rest for 5–10 minutes (follow wallpaper manufacturer’s instructions).

Step 4: Hang the Wallpaper

  1. Start from a straight, vertical line drawn with a plumb line.
  2. Position the top of the wallpaper at the ceiling and smooth it down the wall with a brush or smoother.
  3. Work from the center outward to remove air bubbles.
  4. Match the pattern carefully when applying the next strip.
  5. Use a seam roller to press joins lightly for a seamless finish.

Avoid over-pressing seams — too much pressure can squeeze out the glue.

Step 5: Clean and Finish

  • Wipe away any excess paste immediately with a damp sponge.
  • Allow the wallpaper to dry naturally — avoid high heat or direct sunlight.
  • Rinse tools with warm water when finished.

Final Thoughts

Bartoline Wallpaper Glue is known for its easy mixing, strong adhesion, and smooth application — making it ideal for both beginners and professionals. By following these simple steps, you’ll achieve a flawless wallpaper finish that lasts for years.

Keywords: Bartoline wallpaper glue, how to use Bartoline wallpaper paste, wallpapering guide, DIY decorating, wallpaper tips, mixing wallpaper glue